Wakai Sangyo Turn Nut F-602 TN-6T (2 pcs)

【Applications】
■Attaching exterior and interior lightweight parts to automobiles
■Attaching hooks, etc., to carports and terraces
■Attaching shelf brackets to steel furniture

[Thickness of attached object] Up to 4mm
(For thicknesses exceeding this, please purchase separate screws)
[Pilot hole diameter] Stamped hole: 12mm, Drilled hole: 12.2mm
[Base material thickness] 0.5-3mm
[Hollow space width] 22mm
【Standard】F-602
Breaking Torque kN?cm (kgf?cm)…1.96 (200 kgf?cm)
Maximum Pull-out Strength kN (kgf)…7.8 (800 kgf)

【Precautions for Use】
●Cannot be used on soft bases such as plasterboard or sound-absorbing boards.
●If the thickness of the attached object exceeds the indicated value, please purchase longer screws separately. Also, use the width of the hollow space as a guide for the length of the screws.
●The Breaking Torque above is the maximum value when the nut breaks. Please tighten to an appropriate torque of approximately 50% depending on the application. For Pull-out Strength, use up to 20% of the maximum pull-out strength.
●The nuts are made of zinc and cannot be used for structures that involve danger.

Thank you for viewing.